MPU-9250 6-Axis Attitude Gyro and Accelero Sensor Module (Without Magnetometer) MPU9250 6-Axis Attitude Gyro Accelerator Sensor Module features the MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis  accelerometer and gyroscope. Hence, the MPU-9250 is a 6-axis Motion Tracking device that combines a 3-axis accelerometer and gyroscope and a Digital Motion Processor (DMP). It is based on I2C Address, Address: 0x68 by default, 0x69 if AD0 is pulled high. The MPU-9250 also features an embedded temperature sensor. This module includes pull-up resistors on the SDA, SCL, and nCS lines, pull-down resistors on the FSYNC and AD0 lines, and an onboard 3.3V voltage regulator allowing you to power the module from 5V sources such as an Arduino. If you desire to power the module from 3.3V you can bridge the solder jumper next to the voltage regulator to bypass the regulator. Applications FPV, RC, and Robots systems GPS navigation systems Impact recognition and logging Gaming and virtual reality input devices Motion-activated functions Intelligent power saving for handheld devices Vibration monitoring and compensation Free-fall detection 6D-orientation detection Package Includes: 1 x MPU-9250 Module Specifications Module Model GY-9250 Use chip MPU-9250 Pin spacing 2.54mm Gyroscope range ± 250 500 1000 2000 ° / s Dimensions  15mm * 25mm Weight  5 grams

MPU-6050 Triple-Axis Accelerometer Gyroscope Module The MPU6050 is an IMU (Inertial Estimation Unit) sensor, a portion of the Micro-Electro-Mechanical Systems (MEMS) family. It highlights a 3-axis accelerometer and a 3-axis gyroscope. The MPU-6050 module in addition called a magnetometer sensor. It can identify acceleration up in three measurements (X, Y, and Z) and also measure angular velocity around those axes. This motion-tracking device is often used in applications such as detecting the orientation of a device, detecting movement, and measuring angular velocity. The Inertial measurement unit sensor contains some additional circuitry for interfacing with a microcontroller or other device. The MPU6050 offers precise tracking for both quick and gradual movements. It includes a user-programmable gyroscope with a full-scale range of ±250, ±500, ±1000, and ±2000°/sec (DPS). Additionally, it features a user-programmable accelerometer with a full-scale range of ±2g, ±4g, ±8g, and ±16g.   Read our blog explaining the Interfacing mpu6050 with Raspberry Pi, It covers step by step process. Key

ADXL335 Triple-Axis Accelerometer The ADXL335 Triple-Axis Accelerometer is a breakout board for Analog Devices analog 3-axis accelerometer. The ADXL335 is a small, thin, low-power, complete 3-axis accelerometer with signal-conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration. The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application, with a range of 0.5 Hz to 1600 Hz for the X and Y axes, and a range of 0.5 Hz to 550 Hz for the Z axis. Key

GY-53 VL53L0X Laser ToF Flight Time Range Sensor The GY-53 VL53L0X is a time-of-flight (ToF) laser range sensor that uses a laser to measure distance. It can measure distances up to 2 meters with a resolution of 1 mm. The sensor is often used in applications such as obstacle avoidance, gesture recognition, and 3D scanning. The GY-53 module you mentioned likely contains the VL53L0X sensor and some additional circuitry for interfacing with a microcontroller or other device. Also check the VL53L0X Laser Ranging Sensor from ST Microelectronics. It is a time-of-flight ranging system integrated into a compact module, capable of accurately determining the absolute distance to a target without being significantly influenced by the object's reflectance. GY-53 VL53L0X Laser ToF Flight Time Range Sensor Pinout: Package Includes: 1 x GY-53 VL53L0X Laser ToF Flight Time Range Sensor Specifications: Input voltage 5 - 2.8VDC Dimensions 3 x 2 x 1cms Weight 5 grams

HMC5983 3-Axis 3DOF Compass Magnetometer Module HMC5983 3-Axis Compass Magnetometer Module is the perfect solution for precision navigation. This compact module, made with high-quality materials, ensures accurate heading angles with temperature compensation and automatic offset compensation. Whether you're working on robotics, navigation systems, or IoT projects, this versatile module is designed to meet your needs. The Immersion Gold Process and 220Hz output frequency make it a reliable choice for applications requiring real-time data. Elevate your projects with an advanced compass magnetometer module. Commitment to quality and innovation shines through in every aspect of this module. Get ready to enhance your projects with the power of accurate navigation. Applications: Robotics, Navigation Systems, IoT Projects Package Includes: 1 x HMC5983 3-Axis 3DOF Compass Magnetometer Module Specifications: Output Frequency Maximum 220Hz Heading Angle Accuracy 1-2 Degrees PCB Size 14.5mm * 18.5mm

GY801 9-Axis Magnetic Acceleration Gyroscope Module The GY801 module is a 9-axis motion tracking device that includes a 3-axis accelerometer, a 3-axis gyroscope, and a 3-axis magnetometer (compass). It can measure acceleration, angular velocity, and the Earth's magnetic field in 3 dimensions. The module is often used in applications such as orientation sensing, movement detection, and compass navigation. The GY801 module likely contains the necessary sensors and additional circuitry for interfacing with a microcontroller or other device. The board consists of an L3G4200D 3-axis gyroscope, an ADXL345 3-axis accelerometer, an MC5883L 3-axis magnetometer, and a BMP085 barometer–thermometer. All of the sensors are accessible via an I2C interface. Package Includes: 1 x GY801 9-Axis Magnetic Acceleration Gyroscope Module Specifications Chipset l3g4200d + adxl345 + hmc5883l + bmp085 Power supply 3-5V Model GY-801 Dimensions  25.8mm X 16.8mm Mounting Holes  3mm Weight  5 grams

ADXL345 Accelerometer Module ADXL345 is a Breakout board for the Analog Device's ADXL345 triple-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers (3V3 & 5V). Apart from the above all, necessary components like decoupling capacitors, filter capacitors, pull-up resistors and LED are also populated on board. It is ideal for motion and acceleration sensing applications.It is a low-power, 3-axis MEMS accelerometer module with both I2C and SPI interfaces. The ADXL345 is a low-power, MEMS, three-axis accelerometer module with both SPI and I2C interfaces to communicate with your controller like Arduino, Raspberry Pi, PIC, etc. It also has user-selectable sensitivity and 10-13bit of resolution. This Digital Accelerometer has a voltage regulator on board hence can be connected to both 5V and 3.3V powered controllers. Its high-resolution 4mg/LSB also enables it to measure less than 1° change in the orientation of the object. The ADXL Sensor can be used in Robotics applications, measuring vibration in a machine, in the data acquisition system of a vehicle, measuring the motions of a bridge, etc. It can also be used to detect taps on an object. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G. And it supports output data rates ranging from 10Hz to 3200Hz such as the Arduino. Applications: Cost-sensitive, low power, motion- and tilt-sensing applications Mobile devices Gaming systems Data acquisition system of a vehicle Measuring vibration in a machine Disk drive protection Image stabilization Sports and health devices Package Includes: 25 x ADXL 345 Module Specifications Supply Voltage 3.3 V/ 5V Interface Type I2C, SPI Sensing Range ±2g, ±4g, ±8g, ±16g X 28.6 LSB/g Y 31.2 LSB/g Z 34.5 LSB/g Dimensions  3 x 2 x 1cms  Weight  5 grams

MPU-6050 Triple-Axis Accelerometer & Gyroscope Module The MPU-6050 Triple-Axis Accelerometer & Gyroscope Module is a 6-axis motion tracking device that consists of a 3-axis accelerometer and a 3-axis gyroscope. It can measure acceleration in 3 dimensions (X, Y, and Z) as well as angular velocity about those axes. The sensor is often used in applications such as detecting the orientation of a device, detecting movement and measuring angular velocity. The module you mentioned likely contains the MPU-6050 sensor and some additional circuitry for interfacing with a microcontroller or other device. For precision tracking of both fast and slow motions, the MPU-60X0 features a user-programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (DPS). The parts also have a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.The MPU-6000 family is comprised of two parts, the MPU-6000 and MPU-6050. These parts are identical to each other with two exceptions. The MPU-6050 supports I2C communications at up to 400kHz and has a VLOGIC pin that defines its interface voltage levels; the MPU-6000 supports SPI at up to 20MHz in addition to I2C and has a single supply pin, VDD, which is both the device’s logic reference supply and the analog supply for the part. Package Includes: 25 x MPU-6050 Triple-Axis Accelerometer & Gyroscope Module Specifications On-board 3.3V regulator Interface  I2C Interface Gyroscope operating current 3.6 mA Accelerometer normal operating current 500 µA Crystal frequency 32.768 KHz  Input power supply 5V Dimensions  3 x 2 x 1cms

ADXL345 Accelerometer Module ADXL345 is a Breakout board for the Analog Device's ADXL345 triple-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers (3V3 & 5V). Components like decoupling capacitors, filter capacitors, pull-up resistors, and LED are also populated on board. This is ideal for motion and acceleration sensing applications. It is a low-power, 3-axis accelerometer module with I2C and SPI interfaces to communicate with controllers like Arduino Raspberry Pi, PIC, etc. It also has user-selectable sensitivity and 10-13bit of resolution. This Digital Accelerometer has a voltage regulator on board and can be connected to 5V and 3.3V powered controllers. Its high-resolution 4mg/LSB also enables it to measure less than 1° change in the object orientation. The ADXL345 features 4 sensitivity ranges from +/- 2G to +/- 16G. And it supports output data rates ranging from 10Hz to 3200Hz such as the Arduino. Also check, our product 6-axis motion tracking mpu6050 sensor