GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 280mm long GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 280mm long used for generating linear motion, timing synchronization, torque & speed conversion, etc. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface. The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. We sell a wide range of geared pulleys, idler pulleys, shafts, and stepper motors that can be used along with this belt. Be sure to check it out before ordering this belt. check out : B300MXL/240MXL Timing Belt 300 Teeth 6mm Width for 3D Printer Package Includes: 1 x GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 280mm long Specifications: Item GT2 Rubber Timing Belt Belt Type Closed Loop Loop Length 280 mm Width 6 mm Pitch 2 mm

GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 400 mm long GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 400 m long used for generating linear motion, timing synchronization, torque & speed conversion, etc. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface. The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2 mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. We sell a wide range of geared pulleys, idler pulleys, shafts, and stepper motors that can be used along with this belt. Be sure to check it out before ordering this belt. Package Includes: 1 x GT2 Rubber Timing Belt Closed Loop 6 mm Width for 3D Printer CNC 6mm width and 400 mm long Specifications: Item GT2 Rubber Timing Belt Belt Type Closed Loop Loop Length 400 mm Width 6 mm Pitch 2 mm

GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 202mm long GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 202mm long used for generating linear motion, timing synchronization, torque & speed conversion, etc. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface. The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. We sell a wide range of geared pulleys, idler pulleys, shafts, and stepper motors that can be used along with this belt. Be sure to check it out before ordering this belt. Package Includes: 1 x GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 202mm long Specifications: Item GT2 Rubber Timing Belt Belt Type Closed Loop Loop Length 202 mm Width 6 mm Pitch 2 mm

GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 180 mm long GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 180 mm long used for generating linear motion, timing synchronization, torque & speed conversion, etc. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface. The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2 mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. We sell a wide range of geared pulleys, idler pulleys, shafts, and stepper motors that can be used along with this belt. Be sure to check it out before ordering this belt. Also check GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 610 mm long. It is made of high-quality rubber for durability and long life. The closed-loop design ensures that the belt will not slip or come off the pulleys, even under high tension. This makes it a reliable choice for critical applications. Package Includes: 1 x GT2 Rubber Timing Belt Closed Loop 6 mm Width for 3D Printer CNC 6mm width and 180 mm long Specifications: Item GT2 Rubber Timing Belt Belt Type Closed Loop Loop Length 180 mm Width 6 mm Pitch 2 mm

GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 610 mm long GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 610 mm long used for generating linear motion, timing synchronization, torque & speed conversion, etc. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface. The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2 mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. We sell a wide range of geared pulleys, idler pulleys, shafts, and stepper motors that can be used along with this belt. Be sure to check it out before ordering this belt. Package Includes: 1 x GT2 Rubber Timing Belt Closed Loop 6 mm Width for 3D Printer CNC 6mm width and 610 mm long Specifications: Item GT2 Rubber Timing Belt Belt Type Closed Loop Loop Length 610 mm Width 6 mm Pitch 2 mm

GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 200mm long GT2 Rubber Timing Belt is a Closed-loop with 6mm width and 200mm long used for generating linear motion, timing synchronization, torque & speed conversion, etc. The Grip used in the GT2 system is an extension of the HTD system with greater load-carrying capacity. It is made as a flexible belt with teeth molded onto its inner surface. The GT2 series of belts are designed specifically for linear motion. They use a rounded tooth profile, with 2mm pitch, that guarantees that the belt tooth fits smoothly and accurately in the pulley groove, so when you reverse the pulley direction, there is no room for the belt to move in the groove. We sell a wide range of geared pulleys, idler pulleys, shafts, and stepper motors that can be used along with this belt. Be sure to check it out before ordering this belt. check out : GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 400 mm long Also check GT2 Rubber Timing Belt, specifically a closed-loop variant with 6mm width and 180mm length. It is designed for use in 3D printers and CNC machines, offering features such as deep contant, cut-to-length flexibility, strong anti-wear properties, and reliable power transmission. The GT2 system incorporates a grip extension of the HTD system, providing greater load-carrying capacity. Package Includes: 1 x GT2 Rubber Timing Belt Closed Loop 6mm Width for 3D Printer CNC 6mm width and 200mm long Specifications: Item GT2 Rubber Timing Belt Belt Type Closed Loop Loop Length 200 mm Width 6 mm Pitch 2 mm

Openbuilds Smooth Idler Bearing Pulley H Groove Wheel Rubber Bearing Pulley H groove Wheel is a motor grade 625 bearing. This pulley can be mounted in a variety of fashions to fit your design. It can be used in 3D printers and CNC engraving machines. There are a lot of other ways these can be mounted too - for instance, you can bolt them anywhere along a length of our extrusion using a suitable bolt, spacer, and tee nut. Package Includes: 1 x Openbuilds Smooth Idler Bearing Pulley H Groove Wheel Specifications: Outer diameter (mm) 22 Width (mm) 12.7 Colour Black Material POM Hard Weight 12.4g

GT2 20 tooth bore 6.35mm for width 6mm belt for 3D Printer This is Aluminum GT2 Timing Pulley 20 Tooth 6.35mm Bore For 6mm Belt. For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profile. This pulley has 20 teeth and a 6.35mm inner bore. Two set screws can be used to attach it firmly to any 6.35mm diameter shaft. Full aluminum construction means these are very light and very durable.

300mm GT2 Timing Belt 150 Teeth 6mm Width for 3D Printer CNC The product has good dynamic performance, good performance, and good resistance to cracking. It has excellent ozone performance, as well as aging resistance, heat resistance, and wear resistance. The timing belt is also called as the synchronous belt is popularly known for its non-slipping mechanical drive belt. It is composed of the flexible belt which contains a row of teeth embedded on the inner surface of the belt. Timing pulley and belt works when the toothed parts become compatible with each other. It is a belt that usually features teeth on the inside surface, while a timing chain is a roller chain. Widely used in mechanical devices, printers/photocopiers, 3d printer, robotics, automation, etc. Package Includes: 1 x 300mm GT2 Timing Belt 150 Teeth 6mm Width for 3D Printer CNC Specifications: Type Closed loop Material Rubber Tooth Number 150 Loop Length  300mm Width 6mm Pitch 2mm Belt Height 1.14mm

GT2 Open Timing Belt 6mm Width Pitch 2mm for 3D Printer The GT2 open timing belt is suitable for dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, inkjet printer, conveyor, bonders etc. Package Includes: 1 x GT2 Open Timing Belt Specifications Pitch 2mm belt height 1.38m tooth height 0. 75mm Material Rubber rubber width 6mm Weight  15 grams

GT2.5-6mm Belt Width 20 Teeth Timing Pulley 5mm Bore with 18mm Outer Diameter If you need a reliable pulley for your project, check out this GT2-6mm Timing Pulley. It has 20 teeth, an 18mm outer diameter, and a 5mm bore, and it’s made to work with 6mm GT2.5 belts. It’s great for 3D printers, CNC machines, and robotics. This pulley is made from strong aluminum, so it’s built to last. It has a smooth finish and fits well with the belt, making sure everything moves smoothly. Whether you're building something new or fixing an old machine, this pulley will help with precise movement and positioning.

GT2.5 6mm Belt Width 20 Teeth 5mm Bore Timing Pulley This is GT2.5-6mm Belt Width 20Teeth 5mm Bore Timing Pulley with 20Teeth, 5mm bore diameter. The aluminum 16T GT2.5 timing pulley has a high-quality shiny surface appearance and robust construction, and longer working life. The rounded teeth of this tooth and belt are engaged together longer providing a smoother transition between teeth and, good performance for 3D printers. Applications include a 3D printer, CNC, and other robotics with timing belt pulley, GT2.5 timing belt pulley system especially suited for linear movement and positioning, and it’s good for GT2.5 6mm Width Belt.  Applications: 3D Printers CNC Machines DIY Machines with Pulley Package Includes: 1 x GT2.5 6mm Belt Width 20 Teeth 5mm Bore Timing Pulley Specifications: Material Aluminium Inner Diameter (ID) (mm) 5 Outer Diameter (OD)(mm) 16 Width (mm) 16 Compatible With M4x4 No. of teeth 20 Weight (gm) 8

2GT 20 teeth pulley wheel for Belt 6mm Perlin passive idler pulley wheel bore 5mm This Aluminum GT2 Timing Idler Pulley wheel For 6mm Belt 20 Tooth 5mm Bore pulley works with GT2 6mm wide timing belt; it will work perfectly with GT2 pulley-belt sets we are selling in our store. This idler is a good match for 20T GT2 driving Timing Belt Pulley. Many DIY 3D printer makers are using idler pulleys based on 3D Printed wheels. Inaccurate printed idler decrease printing quality and create vibrations since the outside diameter of the idler is not concentric to the rotation axis. Other makers are using double bearings with stationary washers clamped from both sides. This solution is not ideal since there is friction between the moving belt to the stationary washers. Our Dual BB Aluminum Idler Pulley is a simple and inexpensive solution to this problem. Check out our entire range of Timing Belt & Pulley. Package Includes: 1 x 2GT 20 teeth pulley wheel for Belt 6mm Perlin passive idler pulley wheel bore 5mm Specifications: Material Aluminium Inner Diameter (ID) (mm) 5 Outer Diameter (OD)(mm) 18 No. of teeth 20 No. of Bearings 2 Width (mm) 8.5 Weight (gm) 6

GT2-6mm Belt Width 36 Teeth 6.35mm Bore Timing Pulley GT2-6mm Belt Width 36 Teeth 6.35mm Bore Timing Pulley is the basic element of the system transmitting power to the moving parts of the machine. Some are made of high-quality aluminum. It will find its application in the construction of 3D printers or similar projects. Aluminum 36T GT2 timing pulley has high quality shiny surface appearance and robust construction, longer working life. he rounded teeth of this tooth and belt are engaged together longer providing a smoother transition between teeth, good performance for 3D printers. Applications include 3D printer, CNC and other robotics with timing belt pulley, GT2 timing belt pulley system especially suited for linear movement and positioning, and it’s good for GT2 6mm Width Belt.  Applications: Widely used in 3D printers and CNC Machines. Can be used in DIY machineries Package Includes: 1 x GT2-6mm Belt Width 36 Teeth 6.35mm Bore Timing Pulley Specifications: No. of teeth 36 Bore Diameter(mm) 6.35 Outer Diameter(mm) 25 Compatible With M4x4 Dimensions (mm) 25 x 25 x 17.8 Weight (gm) 15

Aluminum GT2 Timing Pulley 20 Tooth 8mm Bore For 6.35mm Belt – 2Pcs This is an Aluminum GT2 Timing Pulley 20 Tooth 8mm Bore For a 6.35mm Belt. For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6.35mm wide belts only – MXL belts will slip due to the different tooth profiles.This pulley has 20 teeth and an 8mm inner bore. Two set screws can be used to attach it firmly to any 8mm diameter shaft. Full aluminum construction means these are very light and very durable. Package Includes: 2 x Aluminum GT2 Timing Pulley 20 Tooth 8mm Bore For 6mm Belt Specifications: Material Aluminum Inner Diameter (ID) (mm) 8 mm Outer Diameter (OD)(mm) 16 Compatible With M4x4 No. of teeth 20 Width (mm) 16 Weight (gm) 6