Zigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna Zigbee XBee Pro S2C 802.15.4 Module is the perfect solution for long-range communication and home automation. This Zigbee XBee module boasts a 3Km+ range, making it ideal for various applications. It supports binding and multicasting, catering to the needs of home automation enthusiasts. The firmware upgrade can be easily done via UART, SPI, or over the air, ensuring continuous improvement and compatibility. The module's universal design fits Parallax XBee adapters and Propeller Activity Board, showcasing industry-leading mesh-network topology for worldwide deployment. Crafted with quality materials, the 3.2dBi antenna enhances durability and signal strength. Install with ease and enjoy reliable, long-range communication. Zigbee XBee Pro S2C 802.15.4 Module is designed to meet the highest standards of quality and performance. It is perfect for tech enthusiasts, DIY projects, and professionals looking for a reliable long-range communication solution.

ESP32 LoRa with 0.96 Inch Blue OLED Display ( Type C- Connector) The ESP32 LoRa SX1278 is a next-generation IoT development board made for smooth connectivity and long-range, low-power communication. The Tensilica LX6 dual-core ESP32 processor (240MHz, 520 KB SRAM, 600 DMIPS) powers it. The esp32 wifi module for Arduino  has dual-mode Bluetooth (Classic + BLE) and Wi-Fi (802.11 b/g/n HT40) for fast, flexible networking. This esp32 lora module provides ultra-long-range transmission up to 2.6km with an inbuilt SX1278 LoRa modem, 433MHz, -148dBm sensitivity, and +20dBm output power, guaranteeing great dependability for distant Internet of Things applications. It has a CP2102 USB-to-serial chip, a 0.96-inch OLED display, 32MB Flash, and lithium battery charging. It was designed with efficiency and innovation in mind. This ESP32 with an OLED display  is completely compatible with Arduino, enabling developers to design intelligent, scalable solutions for the Internet of Things' future. Check out our collection of LoRa Modules ! Features: Uses Lexin ESP32 as main controller and SX1278 as wireless communication module. Comes with an OLED display. Supports Bluetooth and WiFi connectivity. ESP32 chip is based on Tensilica Xtensa LX6 dual-core microprocessor with operating frequency up to 433MHz. High sensitivity of about -148dBm. Power output of +20 dBm. Operates on 433MHz-510MHz frequency range. Suitable for remote modem applications that require long-range wireless communication. ESP32 LoRa Pinout: Applications Smart industrial devices, including Programmable Logic Controllers (PLCs) Smart medical devices, including wearable health monitors. Smart energy devices, including HVAC and thermostats. Smart security devices, including surveillance cameras and smart locks.

3-6V Mini Submersible Water Pump If you're in search of an efficient and affordable water pumping solution, the Mini Micro Submersible Water Pump is your answer. Operating on a 2.5 ~ 6V power supply, it's versatile and suitable for users of all ages. Our commitment to quality ensures that this pump is both durable and reliable, and you can choose from a range of Color/Size Variations to suit your needs. This water pump incorporates advanced technology, giving it a unique edge, making it ideal for water projects and efficient water management. Crafted with high-quality materials, it thrives in various conditions, all while maintaining an attractive price point. Easy to use and maintain, it's designed for DIY enthusiasts and anyone in need of a water pumping solution. Multipurpose and efficient, this mini submersible pump caters to a wide audience and comes at an affordable price, making it an ideal choice for water enthusiasts and those looking for reliable water pumping. Check out our entire range of DC Pumps & SOVs Features: Flow Rate: 80 - 120 L/H supply range (2.5 ~ 6V) Crafted with high-quality materials for durability Advanced technology for efficient water management Easy to use and maintain, designed for DIY enthusiasts Applications: DIY Projects. Freshwater intake or exhaust systems for fish aquariums. Garden watering systems. Dispensers Irrigation systems

6V Mini Dosing pump This 6V Mini Dosing pump is small size dosing pump for water, chemicals, liquids, and disinfectants. The peristaltic pump has a silicone tube through which the fluid is pumped, which does not come into contact with the pump components, making it completely sealed and safe. It is used in aquariums, medical equipment, or for pumping aggressive fluids. It is also used for the distribution of chemicals, fertilizers, detergents, and disinfectants. This pump requires a 6 V DC supply and can produce a flow rate of up to 10.5 ml per minute. If speed control is required we suggest using a simple PWM signal. Features: Simple construction, High precision, Easy to install and maintain. Application: Medical usage: for liquid transfer, sampling, dispensing Chemical engineering usage: sample analysis, dispensing liquid Ink printer: for transferring ink, cleaning pipeline Laboratory use: liquid dispensing, extract liquid, Beverage: dispensing, filling Environmental usage: transferring and sampling sewage Factory usage: for liquid dispensing

240mm Aluminium Water Cooling Block The 40x200 mm Aluminium Water Cooling Block Head is the best solution to keep electronic devices cool and performing at their best. This cooling blockhead has top-quality construction and impressive features. It's crafted from heavy-duty aluminum and ensures durability and efficient heat dissipation. Its internal flow channel is designed using advanced extrusion forming. It is the best tool to cool computer CPU water, industrial inverter driver, laser head, or industrial control cabinet. Measuring 40x200 mm, this cooling blockhead allows for easy installation and integration into your existing system. Features: Heavy Aluminium build Internal flow channel extrusion forming Applicable to computer CPU water, industrial inverter driver, laser head cooling, industrial control cabinet cooling

60MM 360° Continuous Rotation Wheel for SG90/MG90 RW60 The 60MM 360° Continuous Rotation Wheel for SG90/MG90 (RW60) is designed for smooth and reliable motion in your robotics and DIY projects. Featuring durable silicone tyres, this wheel ensures excellent traction and stability on different surfaces. With a diameter of 60mm (2.36?), it is perfectly suited for SG90 and MG90 continuous rotation servo motors, making it a popular choice for compact robotic designs. The wheel also includes four additional mounting holes for 4-40 bolts, allowing easy integration with universal mounting brackets and providing flexibility in assembly. Whether you are building a small robot, automation system, or experimenting with servo-driven projects, this wheel offers durability and performance at an affordable price. Features: Compatible with SG90/MG90 360° continuous rotation servo motors High-quality silicone tyre for better grip Includes 4 mounting holes for universal brackets Lightweight and durable design

DFRobot 12V Inclined Electromagnetic Door Lock with Connector The 12V Inclined Electromagnetic Door Lock comes with a DC2.1 Female Terminal Connector. It is a durable, compact lock ideal for smart projects and automation. It features two control wires (red: +, black: -) for simple lock/unlock via power on/off. Its metal shell and frame are treated with electroless nickel plating, offering excellent corrosion resistance and long-lasting performance. The electromagnetic lock features a smooth, pure-copper bolt and lock hole, ensuring seamless locking without jams. For added flexibility, the bolt can be rotated to 90°, 180°, or 270° to fit various door configurations. This electromagnetic lock kit is ideal for DIY smart home projects, vending machines, storage cabinets, file drawers, automation systems, and more. Pair it with relay modules and microcontrollers for intelligent access control solutions. 12V Electromagnetic Door Lock Interfacing with Arduino Circuit Diagram Applications Doors, Drawers, Storage cabinets, Showcase, Sale machines, etc.

HTC DM-97 Digital Multimeter This model no DM 97 A multimeter or a multitester, also known as a VOM (Volt-Ohm meter or Volt-Ohm-milliammeter ), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter would include basic features such as the ability to measure voltage, current, and resistance. Analog multimeters use a microammeter whose pointer moves over a scale calibrated for all the different measurements that can be made. Digital multimeters (DMM, DVOM) display the measured value in numerals, and may also display a bar of a length proportional to the quantity being measured. Digital multimeters are now far more common but analog multimeters are still preferable in some cases, for example when monitoring a rapidly varying value.

ELECROW ThinkNode G1 868MHz 8-Channel LoRaWAN Gateway with SX1302 Chip Struggling with indoor positioning issues? The ThinkNode G1 is the solution! The Elecrow ThinkNode G1 is a state-of-the-art LoRaWAN indoor gateway that connects seamlessly via WiFi, Bluetooth, or Ethernet, supporting 8-channel transmission. Using LoRa wireless technology, it provides long-range, low-rate data transmission for reliable communication. With an advanced Semtech packet forwarder, SX1302 LoRa concentrator, and dual SX1250 chips, the G1 ensures efficient data processing. It supports global ISM frequency bands (815MHz to 960MHz) and offers a 5-10 km LoRaWAN signal range. Ideal for smart buildings, automation, logistics, smart metering, agriculture, and more, the G1 ensures stable connectivity and is the perfect solution for building robust LoRaWAN networks. Exclusively designed by Elecrow. Features Broad Network Compatibility Supports multiple LoRaWAN network servers, including The Things Network (TTN), ChirpStack, and more, offering flexible options for network integration with advanced packet forwarding technology. Integrated Gateway Server Features a plug-and-play design, simplifying network setup and speeding up IoT project deployment. Wide Signal Coverage Delivers 5 to 10 km of LoRaWAN signal range, ensuring reliable and efficient data transmission over long distances. High-Performance Hardware Powered by the MediaTek MT7628 processor and Semtech SX1302 baseband chip, ensuring robust and stable data handling. Flexible Connectivity Options Supports Wi-Fi, Ethernet, and other connection methods, providing a range of network access possibilities. Easy-to-Use Management Tools Equipped with professional management tools and cloud services, enabling effortless configuration and quick deployment through an intuitive Web interface for an enhanced user experience.

Hall Effect Sensor The RM0435 Sensor is an integrated Hall Effect latched sensor. Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely, but can be limited by the glass encapsulation and size. A Hall Effect sensor is much smaller, but can handle less current than a reed switch. Thanks to its wide operating voltage range and extended choice of temperature range, it is quite suitable for use in automotive, industrial and consumer applications. The device is delivered in a Thin Small Outline Transistor (TSOT) for surface mount process and in a Plastic Single in Line (TO-92 flat) for through hole mount. Both 3-lead packages are RoHS compliant. The output signal of this sensor is open-drain type. Such output allows simple connectivity with TTL or CMOS logic by using a pull-up resistor tied between a pull-up voltage and the device output. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a Schmitt trigger to provide switching hysteresis for noise rejection, and open-collector output. An internal band gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. If a magnetic flux density larger than threshold Bop, DO is turned on (low). The output state is held until a magnetic flux density reversal falls below Burp causing DO to be turned off (high). The RM0435  exhibits latch magnetic switching characteristics. Therefore, it requires both south and north Poles to operate properly.

NRF24L01 Adapter Board With the 3.3V VCC Adapter Board, you can utilize NRF24l01 type transceivers on 5V systems, such as Arduino. It functions by regulating the 3.3V input to 1.9~3.6V DC and includes bypass capacitors for dependable operation. This adapter board is particularly designed to work with the NRF24L01 transceiver module and features the Enhanced ShockBurst (ESB) protocol. It supports two-way data packet communication with packet buffering, packet acknowledgement, and automatic re-transmission of lost packets. Features It can be used with NRF24L01 wireless module Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module Allows for easy connection to nRF24L01+ modules Small power on SMD LED indicator On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)

HC-SR501 PIR Sensor (Passive Infrared Sensor) + IR Proximity Sensor The HC-SR501 PIR Motion Sensor Module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to as “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion Sensor” sensors. The PIR Motion sensor module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. The PIR Sensor has a delay time adjustment Potentiometer and a sensitivity adjustment Potentiometer. Repeat Trigger Selection Jumper is also available. Compatible with Arduino , Raspberry Pi , NODE MCU , PIC, 8051, etc. The IR Proximity Sensor module has great adaptive capability of the ambient light, having a pair of infrared transmitters and a receiver tube, the infrared emitting tube emits a certain frequency, encounters an obstacle detection direction (reflecting surface), and infrared reflected back to the receiver tube receiving, after a comparator circuit processing, the green LED lights up, while the signal output will output digital signal (a low-level signal), through the potentiometer knob to adjust the detection distance, the effective distance range 2 ~ 10cm working voltage of 3.3V-5V. The detection range of the PIR sensor can be adjusted by the potentiometer, with little interference, easy to assemble, easy-to-use features that can be widely used for robot obstacle avoidance, obstacle avoidance car assembly line count, black-and-white line tracking, and many other occasions. Check out our entire range of IR Proximity Motion Sensors Also browse the wide range of Sensor Kits at affordable prices. read our blog explaining the infrared sensor working principle , Learn about the components, physics laws involved, and their applications in proximity sensing, item counting, burglar alarms, and more. PIR Sensor Pinout: IR Proximity Sensor Pinout: Applications: PIR sensors are used in thermal sensing applications, such as security and motion detection. The IR Sensor can be used in IP cameras. The PIR sensors are also used for Alarm systems and other crime-prevention devices. The IR sensor can be used for battery-driven human presence sensors for IoT smart homes. Read our blog about how does a proximity sensor work where we discuss what proximity sensors are, the features of proximity sensors, how does proximity sensor work, and the different types of proximity sensors. read our blog explaining the working principle of pir sensor , provides comprehensive information about Passive Infrared (PIR) sensors.

70 x 20 mm Robot Wheel and Tyre for 6mm shaft This is the 7 x 2 cm gear motor robot wheel, These wheels can be used with the motors having 6mm shaft, The diameter of the wheel is 70 mm and the width is 20 mm including the rubber grip as well. These wheels are great for makers, hobby engineers, and anyone who wants to build small car projects. Suitable for running on the ground, good wear resistance, perfect replacement for your kit. These wheels are High-quality PCB FR4 Grade with FPT Certified, easy to mount, durable and cheap. With 6mm hole for the shaft and the screw for fitting making it very easy to mount on motors. check out : Mini Wheel (2.5 cm Dia.) Features: Light weight Durable Smooth surface Applications: Gear motor robot Robot cars used for robots

Original Mastech MS830L Digital Pocket Multimeter with Probes It is a handheld Digital Mastech Multimeter for measuring DC and AC Voltage, DC Current, Resistance, Diode, and Transistor with battery operation. The Mastech MS830L Digital Multimeter has a Blue Backlight LCD with 1999 counts and 2-3/sec updates Measuring method. It features a dual-slope integration A/D Converter. Safety Measures for MS830L: Failing these Precautions May Lead to Instrument Damage Always make sure the Test Probes are fitted in the correct sockets (Especially while measuring AC Voltage ) Please choose the correct measuring option before you connect the probe. (As a thumb rule always choose the greater value and decrease if required) While measuring current, make sure to put the Red Probe in the “10A” socket and the measuring connection should be in “Series” While measuring all other parameters other than Current (Ampere), the measuring connection should be in “Parallel” If by mistake a wrong connection or option is selected and the measurement is initiated, the instrument will Blink / Beep. Remove the connections immediately to restrict the damage to a minimum The instrument can only be used in conjunction with the probe for compliance with safety standards. If the probe needs replacing due to damage, the replacement must be of the same type or the same electrical specifications Do not exceed the input limits specified for each range When the instrument is measuring, do not touch the input terminal, not in use When a measurement range is uncertain, turn the function/range switch to the maximum range position Features: Measurement Capabilities: Measures DC and AC voltage, DC current, resistance, diode, and transistor. Display: Blue backlight LCD display with 1999 counts, updating 2-3 times per second. Power Source: Operates on a 9V battery (NEDA 1604 or 6F22 type). Data Hold Function: Allows you to freeze the displayed reading for easy recording. Continuity Buzzer: Audible alert for continuity testing. Low Battery Indicator: Displays a warning when the battery is low. Compact Size: Pocket-sized design for portability and convenience. Applications: Electrical Troubleshooting DIY Electronics Projects Automotive Testing Home Appliance Repair Educational Purposes Field Service Measurement: DC Voltage up to 600V (In 5 Ranges) AC Voltage up to 600V (In 2 Ranges) DC Current up to 10A (In 5 Ranges) Resistance up to 2 M.OHMS (In 5 Ranges)

DIY Acrylic/Plastic Robot Manipulator Mechanical Arm Kit Ready for an electrifying journey into robotics? Check out our DIY Acrylic Robot Manipulator Mechanical Arm Kit! Crafted with precision and passion to bring your robotic dreams to life. Our mechanical robotic arm kit is made from high-quality acrylic, so it's tough and looks great. This robot arm kit works smoothly with SG90 micro servo and gives you precise control. The claw attachment lets you grip surfaces firmly which makes this robot arm kit easy to handle objects smoothly and accurately. Our Acrylic Robot Kit is perfect for learning Arduino programming and control theory. It's great for guests or students, giving hands-on experience in building and programming robotic arms. This A rduino robotic arm kit sparks curiosity and creativity in enthusiasts and students. Whether you're a seasoned robotics enthusiast or a curious beginner, our DIY Acrylic Robot Manipulator Mechanical Arm Kit is perfect for you. Don't miss out on the opportunity to revolutionize your robotics experience with our Acrylic Robot Kit in India. Order your Arm kit today from Iotcart and take the first step toward a future filled with innovation and excitement! Note: The robotic arm kit does not include a servo, it must be purchased separately.